Now you can do one of three things, let it go till it literally falls apart, throw it out and buy a new one, or fix it. "Fix it?!" I hear you cry... Well I found a way to put a patch on my basket and it is now it is working better and will last longer.
So you are thinking I'm crazy these things only cost a few dollars in the first place so either use it till it falls apart and then buy a new one or just buy a new one. I could but really what happened was I found a good one that was only falling apart on the bottom and the handle was great so I really wanted to get a few more years out of it (cause I looked and can't find another like it).
So you are gonna try this fix? Well here is what you need...
A pack of double fold bias tape (or binding) I think I bought the 1" size.
Thread
Pins
Sewing Machine (optional)
You could make your own bias tape but I chose not too do that. It is easy and you could look up how to do it if you want to just use some fabric you have on hand.
Step 1: Measure and cut your bias tape for one side of the basket.
Step 2: Pin the bias tape in place.
Step 3: Sew the bias tape using either your sewing machine or a needle and thread. If you use a sewing machine then be careful working around the wire mesh, and I recommend using a zipper foot. I used my machine and it didn't give the best results but was quicker, and hey it is still just a cheap laundy basket. I'm not sure I would have done better with a needle and thread and my 2 hands but you may if you are careful.
Step 4: Repeat steps 1-3 on the other sides.
Voila your basket is now sturdier for a while longer. You're welcome.
No comments:
Post a Comment